Category: Power/Hand Tools   - Bevellers, Grinders, Benders, Slat Cleaner Tools, Flex Arms

Small Portable Pipe Beveller - MMP-S

The MMP-S pipe and tube beveling machine weld prep chamfers and radius edges on tubes and pipes. Pipe diameters from 3-12 inches. Bevel width up to 3/4 inch and wall thickness up to 5/8 inch. Bevel angles from 0 to 90 degrees. Easy to setup and safe to operate. Bevels straight (flat) or radius edges. For Gerima models: SMA40E, SMA50E and SMA40P.

Highlighted Features/Notes

  • Pipe diameter: 3-12 inches
  • Max bevel width: Up to 3/4 inch
  • Wall thickness: Up to 5/8 inch
  • Bevel angles: 30/37.5/45 degrees

Silverline Series 10 Ton Bending

The portable hydraulic bending machine can easily bend mild steel bar stock up to 4 inch wide x 1/4 inch thick, and round stock up to 2 inch diameter. For more info please contact us.

Highlighted Features/Notes

  • Delivers 10 tons of bending power
  • Easily connects to hydraulic power source
  • Optional accessories available for pipe bending, notching and flaring
  • Lightweight bending machine

Slag Hog Slat Cleaner - 66100

The Slag Hog model 66100 is made for minimum spacing between slats of 1.75 inch. Slag removal equipment for use on most lasers, including: Amada, Bystronic, Cincinnati, Ermak, Esab, Finn Power, Haco, Karakoc, Laser Photonics, LVD Strippit, Mazak, Messer, Mitsubishi, MultiCam, Prima, Salvagnini, Sukota, Trumpf, World Lasers and more. Custom size handle available upon request.

Highlighted Features/Notes

  • Extend the life of the slats on your laser
  • Improve cut quality with a clean laser table
  • Improve laser up time
  • Works on copper and steel slats

Flex Arms

A Flex Arm Torque Reaction Arm is designed to counterbalance any tool weight. Flex Arm has a Torque Arm to absorb any torque a tool puts out. A Flex Arm Articulating Arms can move and lock material in place. Save time, reduce operator error and improve operations by using the Flex Arm as a tool balancer. Our professionals can also design a custom arm to meet your specific needs.

Highlighted Features/Notes

    Applications:
  • Torque Reaction Arm
  • Torgue Arm
  • Torque
  • Assembly Arm
  • Balancing Arm
  • Nut Running
  • Tool Balancing
  • Stud Welder
  • Screw Driving
  • Helicoil Insertion
  • Counterbalance
  • Articulation Arm

Silverline Series Manual Bending

Manually bend thin gauge wire, small tube, and thin flat material for small part configuration. For more info please contact us.

Highlighted Features/Notes

  • Manual bend wire, round bar stock up to 5/8 inch, flat bar stock on edge up to 1-1/2 inch tall x 5/16 inch thick, flat bar stock on flat side up to 3/4 inch wide x 5/16 inch thick and tube up to 1 inch diameter
  • Optional attachments available
  • Lightweight manual bender for low run of small parts
  • Multiple holes in work area allows for versatility in bending options

Slag Hog Slat Cleaner - 66132-1-1

The Slag Hog model 66132-1-1 is made for minimum spacing between stals of 1.25 inch. Slag removal equipment for use on most lasers, including: Amada, Bystronic, Cincinnati, Ermak, Esab, Finn Power, Haco, Karakoc, Laser Photonics, LVD Strippit, Mazak, Messer, Mitsubishi, MultiCam, Prima, Salvagnini, Sukota, Trumpf, World Lasers and more. Custom size handle available upon request.

Highlighted Features/Notes

  • Extend the life of the slats on your laser
  • Improve cut quality with a clean laser table
  • Improve laser up time
  • Works on copper and steel slats

Medium Portable Pipe Beveller - MMP-M

The MMP-M pipe and tube beveling machine weld prep chamfers and radius edges on tubes and pipes. Pipe diameters from 3-16 inches. Bevel width up to 3/4 inch and wall thickness up to 5/8 inch. Bevel angles from 0 to 90 degrees. Easy to setup and safe to operate. Bevels straight (flat) or radius edges. For Gerima models: SMA40E, SMA50E and SMA40P.

Highlighted Features/Notes

  • Pipe diameter: 3-16 inches
  • Max bevel width: Up to 3/4 inch
  • Wall thickness: Up to 5/8 inch
  • Bevel angles: 30/37.5/45 degrees

Rhino Organizer Hammer

This unique tool makes quick work of removing cut parts from a laser or Waterjet cut skeleton. Utilizing shop air to create quick vibrations that break the tab loose leaving the finished part in good condition. The air actuated Rhino Hammer gently forces the cut part from the skeleton coupled with a Polyurethane tip to protect the part surface.

Highlighted Features/Notes

  • Lightweight
  • Compact
  • Operates 90 psi
  • Replaceable tips

Large Portable Pipe Beveller - MMP-L

The MMP-L pipe and tube beveling machine weld prep chamfers and radius edges on tubes and pipes. Pipe diameters from 10 inch and up. Bevel width up to 3/4 inch and wall thickness up to 5/8 inch. Bevel angles from 0 to 90 degrees. Easy to setup and safe to operate. Bevels straight (flat) or radius edges. For Gerima models: SMA40E, SMA50E and SMA40P.

Highlighted Features/Notes

  • Pipe diameter: 10 inch and up
  • Max bevel width: Up to 3/4 inch
  • Wall thickness: Up to 5/8 inch
  • Bevel angles: 30/37.5/45 degrees

Pneumatic Portable Plate Bevel Tool - SMA20P

SMA20P pneumatic portable beveling tool is ideal for small bevels, deburring, counter-sinking and radius edges. Bevels straight (flat) or radius bevels.

Highlighted Features/Notes

  • Mills steel, stainless steel, aluminum or plastic
  • Bevels straight (flat) or radius edges
  • Max bevel width 3/8"
  • Available with 30, 45, 60 degree milling heads, additional angles available
  • Radius edges: 2, 3mm

SMT 30 Table Milling Machine

Portable table milling machine for chamfering up to 8mm (45 degree) and radius machining R3 and R4.

Highlighted Features/Notes

  • Voltage: 120V
  • Speed: 2000 - 7600 min-1
  • Power: 1550 watts
  • Dimensions table frame: 450x250x250mm (LxWxH)

Magnet Multi Hand Tool

Handy tool for removing parts from laser bed after cutting.

Highlighted Features/Notes

  • 36 inches length
  • 32 lbs max pull ultra-high temperature magnet
  • Lever to release parts from magnet
  • Remove parts with the 3/8 inch pin or hook

Pneumatic Portable Plate Bevel Tool - SMA30P

The SMA30P utilizes 3 indexable carbide inserts and can achieve up to a 3/8 inch bevel at 30, 45 or 60 degree angle. Bevels straight (flat) or radius bevels. Ideal for small to medium bevels, deburring and radius applications.

Highlighted Features/Notes

  • Bevel width up to 3/8 inch
  • Bevels straight (flat) or radius edges
  • Mills radius edges of 2mm, 3mm, 4mm
  • Mills carbon steel, stainless steel and aluminum
  • Bevel angles of 30, 45 or 60 degrees

Slag Removal Hand Tool

One end of this tool has slot for prying slag from slats. The other end can adjust the material position in the laser machine and separate stacked sheet and plate.

Highlighted Features/Notes

  • 36 inches overall length
  • Wont bend or break with use
  • Straightens tips and removes slag without damaging the slat
  • Engineered to withstand heavy slag

Pneumatic Portable Plate Bevel Tool - SMA40P

SMA40P pneumatic portable beveling tool is ideal for medium bevels, deburring and radius edges. Bevels straight (flat) or radius bevels.

Highlighted Features/Notes

  • Mills steel, stainless steel, aluminum or plastic
  • Bevels straight (flat) or radius edges
  • Max bevel width 5/8"
  • Standard milling heads are 30, 45, 60 degrees, additional angles available
  • Radius edges: 2, 3, 4, 6, 8mm

Pneumatic Portable Plate Bevel Tool - SMA60P

SMA60P is a specialized tool developed to handle a large bevel width in soft materials including aluminum. Bevels straight (flat) or radius bevels.

Highlighted Features/Notes

  • Mills steel, stainless steel, aluminum or plastic
  • Bevels straight (flat) or radius edges
  • Max bevel width 7/8"
  • Radius edges: 2, 3, 4, 6, 8, 10, 12, 15mm
  • Standard milling heads are 30, 45, 60 degrees, additional angles available

Electric Portable Plate Bevel Tool - SMA30E

SMA30E electric portable beveling tool is ideal for small bevels, deburring, counter-sinking and radius edges. Bevels straight (flat) or radius bevels.

Highlighted Features/Notes

  • Mills steel, stainless steel, aluminum or plastic
  • Bevels straight (flat) or radius edges
  • Max bevel width 3/8"
  • Available with 30, 45, 60 degree milling heads, additional angles available
  • Radius edges: 2, 3, 4mm

Electric Portable Plate Bevel Tool - SMA40E

SMA40E electric portable beveling tool is ideal for medium bevels, deburring and radius edges. Bevels straight (flat) or radius bevels.

Highlighted Features/Notes

  • Mills steel, stainless steel, aluminum or plastic
  • Bevels straight (flat) or radius edges
  • Max bevel width 3/8"
  • Standard milling heads are 30, 45, 60 degrees, additional angles available
  • Radius edges: 2, 3, 4, 6mm

Electric Portable Plate Bevel Tool - SMA50E

SMA50E electric portable beveling tool is ideal for medium bevels, deburring and radius edges. Bevels straight (flat) or radius bevels.

Highlighted Features/Notes

  • Mills steel, stainless steel, aluminum or plastic
  • Bevels straight (flat) or radius edges
  • Max bevel width 5/8"
  • Radius edges: 2, 3, 4, 6 or 8mm
  • Standard milling heads are 30, 45 and 60 degrees, additional angles available

MMA Series Rotary Arm For Bevellers

The MMA Series rotary arm is a great option for anyone that owns a Gerima portable bevel tool. Makes work easier by keeping bevel tool level and eliminates torque.

Highlighted Features/Notes

  • Spring loaded guide arm
  • Operational range: 10ft in diameter
  • Relieves operator of weight and stress
  • Keeps tool level and eliminates torque

Electric Portable Grinder - SGC20E

For grinding (deburring) from metal edges and flame cutting edges, also on contour curves and holes possible.

Highlighted Features/Notes

  • 20mm bevel width max
  • 0/45 degree bevel angle
  • 10-40mm grinding tool
  • 230 voltage

Electric Portable Grinder - SGC40E

For grinding (deburring) from metal edges and flame cutting edges, also on contour curves and holes possible.

Highlighted Features/Notes

  • 40mm bevel width max
  • 0/30/45/60 degree bevel angle
  • 40-100mm grinding tool
  • 230 voltage

Pneumatic Portable Grinder - SGC40P

For grinding (deburring) from metal edges and flame cutting edges, also on contour curves and holes possible.

Highlighted Features/Notes

  • 40mm bevel width max
  • 0/30/45/60 degree bevel angle
  • 40-100mm grinding tool
  • Air: 6-7 bar / 40 I/s